Effects of Habitat Fragmentation on the Reproductive Ecology of Four Plant Species in Mallee Woodland

Abstract: Habitat fragmentation has the potential to affect plant reproduction by changing the community of pollinators and natural enemies, the neighborhood of potential mates, the availability of resources, and microclimate. I examined the effect of habitat fragmentation on reproduction of four species found in mallee woodlands of central New South Wales, Australia: Acacia brachybotrya , Senna artemisioides , Eremophila glabra , and Dianella revoluta . At six sites I surveyed plants in a reserve and in a nearby linear strip of vegetation. Two additional sites were established in a large reserve. Many effects were apparent at the extreme end of fragmentation, revealed by two-way analysis of covariance comparing reserves and linear strips at each site. The nature of the response differed among species. Flower production was greater in most linear strip fragments for S. artemisioides and E. glabra . Fruit set efficiency was significantly greater in linear strips for S. artemisioides and significantly lower for A. brachybotrya , E. glabra , and D. revoluta . Fruit predation was lower in most linear strips for E. glabra . For A. brachybotrya , fruit predation was significantly lower in linear strips. The net effect of these changes was a significant increase in whole-plant seed production for S. artemisioides , a significant decrease in whole-plant seed production for A. brachybotrya and in whole-plant fruit production for D. revoluta , and no consistent effect on whole-plant fruit production for E. glabra . In contrast, the only pattern apparent when the effect of fragment size was considered over a range from linear strips <40 m wide to a reserve> 140,000 ha was a positive correlation between the fragment size and fruit-set efficiency of A. brachybotrya . These results suggest that habitat fragmentation can significantly alter important reproductive functions of species, by changing both the plant's physical environment and its interactions with animals.     

Protecting the planet and its people: how do interventions to promote environmental sustainability and occupational safety and health overlap?

Problem: The challenges of both occupational safety and health and environmental sustainability require large-scale behavior change for meaningful improvements to occur. Environmental sustainability, or the ‘green movement’ has received far more attention recently, and certain strategies and recommendations from interventions designed for promoting pro-environmental behaviors may inform efforts to intervene on critical behaviors for improving occupational safety and health. Method: A survey of the literature regarding behavioral interventions for both environmental sustainability and occupational safety and health was conducted. Several theoretical approaches are reviewed, and successful approaches from each domain are identified, as well as parallel challenges and points for crossover. Recommendations are provided for adapting environmental sustainability intervention approaches for occupational safety and health applications. Impact on Industry: Safety and health leaders may achieve sustainable improvements in worker safety and health by harnessing the momentum of the green movement and adapting successful intervention approaches from the environmental sustainability domain.     

Analysis of river water samples utilising a prototype industrial sensing system for phosphorus based on micro-system technology

The application of a phosphorus monitoring device based on microsystems technology (MST) to the analysis of river water is presented. An alternative to the standard molybdenum blue method known as the yellow vanadomolybdophosphoric acid method has been very effectively implemented. The method is simple, a reagent and sample are mixed in a 1:1 ratio forming a yellow complex that absorbs strongly below 400 nm in the UV spectrum. The kinetics of the reaction are rapid and sample turnaround is typically 3 min at room temperature. Therefore a very uncomplicated microfluidic design can be adopted. The working wavelength was chosen as 380 nm to coincide with the peak output of a UV-LED narrow bandwidth light source recently developed by Nichia. The limit of detection for the yellow method in the microfluidic system is 0.2 ppm with a dynamic linear range from 0-50 ppm. The method was applied to a measurement of phosphorus in a local river at specific sampling points along its course.     

Incident, accident, catastrophe: cyanide on the Danube

It has been described as the worst disaster since Chernobyl. In January 2000, a retaining wall failed at the Aurul gold processing plant in Romania, releasing a wave of cyanide and heavy metals that moved quickly from one river to the next through Romania, Hungary, the Federal Republic of Yugoslavia and Bulgaria, killing tens of thousands of fish and other forms of wildlife and poisoning drinking-water supplies. This paper examines how and why the chemical spill at Baia Mare occurred and how responses to it emerged from circumstances at the global, local and immediate levels. The spill demonstrates the importance of the flow of information in framing and interpreting disasters, suggesting that such an event can go unnoticed or be viewed as catastrophic, depending on the political, historical and personal struggles that lead to its publicity. The paper offers a framework for understanding why the spill was alternately perceived as an incident, an accident and a catastrophe based on changing perceptions of culpability.     

Measuring the environmental performance of IPPC industry: I. Devising a quantitative science-based and policy-weighted Environmental Emissions Index

This paper describes the derivation of an Environmental Emissions Index (EEI) intended to quantify the environmental performance of Integrated Pollution Prevention and Control (IPPC) installations and sectors. Characterisation and normalisation methods used in lifecycle analyses were applied to 20 routinely reported emissions parameters, pertaining to six environmental impact categories. Distance to policy targets for relevant emissions were used to weight impact categories, and link the EEI to policy priorities. Ireland and the EU15 were considered as scales of context. The European Pollutant Emission Register was a convenient source of normalisation data, but restricted the context of the EEI to industrial emissions, and distorted outputs. Using national and EU15 total loading estimates for normalisation resulted in an EEI that better reflected the relative contribution of reported emissions towards overall environmental pressures. Using Ireland's pharmaceutical sector as a case study indicated that weighting factors, and the toxicity range of NMVOC emissions, were the largest sources of EEI uncertainty. Through the integration of inventory data, scientific characterisation, and policy targets, the EEI translates reported emissions data from IPPC installations and sectors into a benchmark of environmental performance. It may be regarded as an evolving tool of potential utility to regulators and policy makers.     

Effect of biosurfactants on crude oil desorption and mobilization in a soil system

Microbially produced biosurfactants were studied to enhance crude oil desorption and mobilization in model soil column systems. The ability of biosurfactants from Rhodococcus ruber to remove the oil from the soil core was 1.4-2.3 times greater than that of a synthetic surfactant of suitable properties, Tween 60. Biosurfactant-enhanced oil mobilization was temperature-related, and it was slower at 15 degrees C than at 22-28 degrees C. Mathematical modelling using a one-dimensional filtration model was applied to simulate the process of oil penetration through a soil column in the presence of (bio)surfactants. A strong positive correlation (R(2)=0.99) was found between surfactant penetration through oil-contaminated soil and oil removal activity. Biosurfactant was less adsorbed to soil components than synthetic surfactant, thus rapidly penetrating through the soil column and effectively removing 65-82% of crude oil. Chemical analysis showed that crude oil removed by biosurfactant contained a lower proportion of high-molecular-weight paraffins and asphaltenes, the most nonbiodegradable compounds, compared to initial oil composition. This result suggests that oil mobilized by biosurfactants could be easily biodegraded by soil bacteria. Rhodococcus biosurfactants can be used for in situ remediation of oil-contaminated soils.     

Estimation of VOC emissions

Emissions of volatile organic compounds (VOCs) is a major concern for industry. In order to reduce these, and to apply prevention options, it is necessary to accurately quantify them. A reliable methodology for such quantification does not yet exist. This paper presents an overview of methods currently available, together with some shortcomings. It urges further work to develop reliable techniques, and suggests possible areas for future work.     

Attractancy evaluation of ceralure‐B1 isomer via field captures of mediterranean fruit flies (Diptera: Tephritidae)

Abstract

Commercially prepared ceralure‐B1, an attractant for the Mediterranean fruit fly, Ceratitis capitata (Wiedemann) (Diptera: Tephritidae), was evaluated in trapping tests by comparison with commercial ceralure and trimedlure. Jackson traps were used for medfly captures. The residual ceralure‐B1, ceralure, and trimedlure contents of aged dispensers were determined. The results of this study show that male medfly captures from traps with ceralure‐B1 were as high or higher than male medfly captures from traps with twice the quantity of ceralure or trimedlure. The use of regioselectively synthesized ceralure‐B1, enriched in B1, as a source of a more potent attractant than commercial ceralure and as a more persistent male medfly attractant than trimedlure is reported.     

In situ biofilm barriers: Case study of a nitrate groundwater plume,Albuquerque, New Mexico

A new use for biofilm barriers was developed and successfully applied to treat nitrate‐contaminated groundwater down to drinking water standards. The barrier was created by stimulating indigenous bacteria with injections of molasses as the carbon donor and a combination of yeast extract and trimetaphosphate as nutrients. This injection of amendments results in bacterial growth in the aquifer, which attaches to the sand grains to create a reactive semipermeable biofilm. The biofilm barrier presented in this article reduced the migration of contaminants and provided an active zone for remediation. The cylindrical biobarrier was constructed using eight wells on the perimeter forming a 60‐foot‐diameter reactive biodenitrification region. Another well at the center was installed to continuously extract the treated water. The intent was to produce a continuous source of nitrate‐free water. The system operated for over one year, and during this period, the biobarrier was revived multiple times by reinjecting molasses in the perimeter wells. Nitrate concentrations of treated water decreased from 275 mg/L (as nitrogen) to < 1 mg/L. © 2005 Wiley Periodicals, Inc.